Tenda TEG1124P-24-250W

38,000

SKU: ABC193 Categories: ,

TEG1124P-24-250W is a Tenda PoE switch that offers 24 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-24 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 225 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and isolation to help reduce cabling costs of IP terminals like APs and IP cameras

Description

TENDA TEG1124P-24-250W DESCRIPTION

TEG1124P-24-250W    /    SWITCH    /    1000M&POE 24-PORT GIGABIT ETHERNET SWITCH WITH 24-PORT POE
TEG1124P-24-250W is a Tenda PoE switch that offers 24 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-24 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 225 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and isolation to help reduce cabling costs of IP terminals like APs and IP cameras.
Born for Surveillance

24-Port Gigabit Desktop/Rackmount Switch With 24-Port PoE

6KV Lightning Protection PoE Switch is the only engineering switch
In real projects, APs and cameras are often installed outdoors or at an elevated location, which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light, and even the whole local area network is damaged. Tenda TEG11 series switches have a professional lightning protection design – 6KV Lightning Protection for Ports and the power, and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In a thunderstorm, Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture.

CCTV, Standard, VLAN and Isolation Operation Modes Offered

Standard: The switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
CCTV: The port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other.
VLAN: Ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24 (uplink ports) respectively.
Isolation: Ports 1 to 12 and ports 13 to 24 belong to two different VLANs. This mode can be used to isolate the supervision networks and wireless networks to make them not interfere with each other.

225W PoE power supply simplified wiring

Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras.
Specification
Standard&Protocol
IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at
Indicator
24*Link/Act per device
24*PoE per device
1*Power per device
Interface
24 10/100/1000Base-T ports(Data/Power)
Lightning Protection
6KV
Store & Forward
Yes
exchange capacity
48 Gbps
Packet Forwarding Rate
35.6Mpps
RAM Data Buffer
4Mb
MAC Address Table
4K
PoE supply management
Port 1-24 support IEEE802.3at/af PoE standard
PoE through pin
1 2 4 5 /3 6 7 8 –
Input Power
AC: 100-240V?50/60Hz
Dimension
440*178*44mm( W x D x H )
Power Consumption
in full configuration: <250W
PoE Max Power Supply: 225W
Port Features
Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities
over the other ports. All the ports of the switch can communicate with each other.
VLAN: ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24(uplink ports) respectively.
Isolation: ports 1 to 12 and Ports 13 to 24 belong to two different VLANs.This mode can be used to isolate the supervision networks and wireless networks to make them not interfere with each other.

Environment

Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing”

Reviews

There are no reviews yet.

Be the first to review “Tenda TEG1124P-24-250W”

Your email address will not be published. Required fields are marked *